PLC cyclebox

[email protected]

Member
C
Join Date
Jul 2014
Location
Indianapolis
Posts
1
Beginning to intermediate programmer here: I'm trying to mimic a LabVIEW cyclebox I've created (2 channels, one channel ON while one channel OFF) using a MicroLogix1000. After defining the number of cycles I want, in this case let's say 100, I want to cycle two solenoids off and on for 100 cycles. I've used Modbus TCP/IP in LabVIEW to accomplish this, could I use the same technique with the PLC? Would could I use to loop the outputs going off and on?

Thanks!
 

Similar Topics

Z
Integrate between Flowmeter Promass 300 EH with AB PLC.
Dear All, Currently i'm working with Endress Hauser flowmeter and AB PLC and try to integrate with 2 items. Flow meter spec using is Promass...
Replies
3
Views
36
drbitboy
drbitboy
S
Multiple Panel View 7 on one A-B PLC.
Can I connect two A-B Panel View 7 to a A-B PLC. Same graphics etc. One on the local control panel and the other Panel View 7 in a remote control...
Replies
2
Views
37
James Mcquade
J
X
Detection of HMI Status in the PLC ?
Hello, I'm working with Studio 5000 and ME Station, and I'm trying to find a way to detect if the PC with the HMI is shut down or not. I've tried...
Replies
5
Views
102
Ken Roach
Ken Roach
S
Intermittant plc freeze issue.
Hi all smart and knowledgeable people.I have a hmi connected to 2 Plcs via ethernet.These 2 Plcs connected to control 2 systems in one machine...
Replies
2
Views
104
geniusintraining
geniusintraining
A
AB PLC-5/10 and NT-1776-HSD-R
Dear Experts, I've come across an unusual piece of hardware for AB PLC-5 racks. I mean the NT-1776-HSD-R resolver input module. I have tried...
Replies
0
Views
58
AK5fa
A
Back
Top Bottom