To make things simple. I am have sometimes severe lag between a G12(slave) and G10(master). When I say severe I mean 1 minute. The G12 is the only slave on that port. I am using Datablocks to in the slave and assigning the tags to the 400001 to 400091 range.
I have set the baud to 38400, 8, 1, even.
This is the master settings are attached.
Thanks for any info.
Andre
I have set the baud to 38400, 8, 1, even.
This is the master settings are attached.
Thanks for any info.
Andre