Verification of calculation of a PI controller in PLC.
- Thread starter arocon
- Start date
KalleOlsen
Member
You forgot to tell the PLC type and what PI function name (or number).
Do you mean that you need to know the PI- equation?
Kalle
Do you mean that you need to know the PI- equation?
Kalle
KalleOlsen
Member
I might be slow, but I still don't follow your thinking.
A common example to verify an untracable PI-controller?
And you found nothing with Google?
Look here: http://www.controlguru.com
Kalle
A common example to verify an untracable PI-controller?
And you found nothing with Google?
Look here: http://www.controlguru.com
Kalle
Similar Topics
A cry for help to parky and Mitsubishi gurus.
How do you confirm the firmware version of the iQR PLC or a module such as the RJ71GN11-T2? I have...
Studio 5000 - strange error , "conflict exists in project verification state"
I am trying to upload a test project to our 5069 controller we use...
Hello,
Is there any way of knowing if the battery is depleted in an Allen-Bradley 1756-L82ES in the PLC program? Something similar to the Low...
Hello:
Does any body have experience with tools to simulate DoS attacks, especially attacks which can exploit typical vulnerabilities of...
The original programmer wrote the CPT expression as follows.
60/7.08/(CurrentRecipe.Bake_Time/40)*(32767/100)
Dest: is VFD Frequency setpoint...