I have a Yaskawa VFD V1000 talking with PLC using PMCR. One of the command data in the CX-protocol is <a>+DLE+SOH+STX+NUL+EOT+<l>+(R(EM0000080),3)+<c>, if converted to Hex it’ll be
a+
10
01
02
00
04
+l
R(EM000080,3)
+c
My question is 0102 is supposed to be the register number, but I could not find the register 0102 in V1000 list. Jeffrey
a+
10
01
02
00
04
+l
R(EM000080,3)
+c
My question is 0102 is supposed to be the register number, but I could not find the register 0102 in V1000 list. Jeffrey