lupercus23
Member
In my 1746-NIO41 analog input card , for a full 20mA input , the reading shows only 16383 ,why is it so ? for input address "i:3.1"
Analog current Input in AB SLC
- Thread starter lupercus23
- Start date
(8{)} ( .)
Lifetime Supporting Member
That's the range for current inputs.
-20 mA to +20 mA has the range -16,384 to +16,384
Yosi
-20 mA to +20 mA has the range -16,384 to +16,384
Yosi
lupercus23
Member
OP
i figured it how .
Mickey
Lifetime Supporting Member
See pdf for raw data for both input and output for your card.
Similar Topics
Hello
My analog sensor outputs 4-20mA only.
My analog PLC input sees 0-10V only.
How can I make this work?
I tested out a different sensor...
I've got this 1756-IF8 card configured for 8 single ended inputs as shown below, but none of the channels are read real values (about 4 ma in the...
hi . we are using beckhoff decentralised I/O module on profibus , which has its different analog cards for RTD , current and Voltage input. i need...
Hello,
I have 4-20mA 2-wire transducers powered using external power supply (passive analog module inputs).
How can I protect PLC inputs from...
After reading the 1769-IF16C compact Logix analog input current module field wiring connection we noticed that it be used only with 2 wires and 3...
