Hi,
One of our project using SLC5/05 processor and 1746-NO4I 4-channel analog output module. 4-20ma current output used. When we put 0% (From HMI)we are getting 3ma and when we put 100% we are getting 14ma only we are not getting 4 & 20 ma in 0% & 100%. Output impedance is 250Ohms This output is connected to Quarter turn Modulating actuator. Can anyone give me the solution for this issue.
Thanks,
Regards,
Vinothkumar
One of our project using SLC5/05 processor and 1746-NO4I 4-channel analog output module. 4-20ma current output used. When we put 0% (From HMI)we are getting 3ma and when we put 100% we are getting 14ma only we are not getting 4 & 20 ma in 0% & 100%. Output impedance is 250Ohms This output is connected to Quarter turn Modulating actuator. Can anyone give me the solution for this issue.
Thanks,
Regards,
Vinothkumar