Mixprogramming in PLc

Nyi Myo Thu

Member
N
Join Date
Feb 2012
Location
Yangon
Posts
1
I am now using siemens s7-400H series PLC.I surprisingly found that I can use all types of programmings together.In the past we can use only one type (ladder or block or etc).Is Siemens only plc that supports this kind of mixprogramming?I thought only DCS can use mixprogramming.For instance,we can use block,digital gate,cause and effect matrix,and C script in Yokogawa DCS.
 

Similar Topics

J
PLC SIMATIC S7 1200 / KOP/SCL question
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Replies
2
Views
45
jimix
J
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
5
Views
81
robertmee
R
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
1
Views
37
Lare
L
M
Struggling to get good connectivity with Omron PLC (CS) and KeserverEx
Hi There, I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Replies
1
Views
45
Corsair
C
U
Data logging in PLC or HMI
Hi, Wy we log data in PLC using DLG instruction, when we have option to log data in HMI
Replies
1
Views
61
JesperMP
JesperMP
Back
Top Bottom