karthick7025
Member
Hi..
I am using Micrologix 1400 PLC & conserV energy meter. I want to do the communication between them by DH-485 via RS485 port.( As distance between them is 40 meters apart )
I already set the Channel 0 of micrologix 1400 to DH-485 and also I have cat5 cable. i just use a two wire from cat5 cable for the communication from energy meter to controller. but I couldn't get data in my plc..
So kindly help me out for this problem..
I am using Micrologix 1400 PLC & conserV energy meter. I want to do the communication between them by DH-485 via RS485 port.( As distance between them is 40 meters apart )
I already set the Channel 0 of micrologix 1400 to DH-485 and also I have cat5 cable. i just use a two wire from cat5 cable for the communication from energy meter to controller. but I couldn't get data in my plc..
So kindly help me out for this problem..