I just started working with Crimson 3.0. I have an animated gauge and it works fine but the needle is too thin. Is it possible to make the needle on the gauge wider? Is there a way to make a custom graphic or something that might be able to do this?
Crimson HMI Gauge graphics question
- Thread starter pmbyrne
- Start date
mjevans1
Member
Crimson 3.0 Gauge
How did you create the custom gauge and what did you use for the animation portion? was it the rotation feature and you just scaled the tag into the correct degrees? I am doing a similar project. thanks
How did you create the custom gauge and what did you use for the animation portion? was it the rotation feature and you just scaled the tag into the correct degrees? I am doing a similar project. thanks
Similar Topics
Hello All,
A coworker and myself are currently trying to figure out how we would read a register on our fanuc robot though our crimson G306 HMI...
Yes it's very legacy.. but sometimes it's necessary to use old stuff for fun.. and because it's so much cheaper.
Crimson 3.0 had the ability to...
Hi Experts!
I am trying to get a Redlion Crimson 3.0 HMI to talk to a Rockwell Emulator. I imagine I'll have to use OPC DA. Has anyone done this...
Hi.
I have a tag and I have assigned that tag to the bevel button. When that button is pressed, I want it to display Start and when it's not...
I'm using a Graphite to add to an existing machine that has about 15 alarms set to trigger a red light. I'm wanting to use the alarm viewer as an...
