Coulombboy
Member
Hello guys. I just want to clear out if FTVIEW ME runtime is for running the HMI in the PC. Also, if it is for PC, can we configure the screen to have 1080 resolution? Thanks in advance for the answer.
Factory Talk View ME Runtime
- Thread starter Coulombboy
- Start date
Ken Roach
Lifetime Supporting Member + Moderator
Yes, the FactoryTalk View ME Runtime software and license will allow you to run a FactoryTalk View ME application on an ordinary Windows computer instead of a PanelView Plus terminal.
If you have FactoryTalk View ME Studio installed on a Windows PC, you can run the "test runtime" for two hours before it needs to be reset. To run the application indefinitely, you need the ME Runtime software and license installed.
FactoryTalk View ME can run on a PC with any resolution that is supported by the computer's video card.
"1080" generally refers to "Full HD" video, which is 1920 x 1080 resolution.
If you have FactoryTalk View ME Studio installed on a Windows PC, you can run the "test runtime" for two hours before it needs to be reset. To run the application indefinitely, you need the ME Runtime software and license installed.
FactoryTalk View ME can run on a PC with any resolution that is supported by the computer's video card.
"1080" generally refers to "Full HD" video, which is 1920 x 1080 resolution.
Coulombboy
Member
OP
Thank you so much for the input Sir Ken.
Similar Topics
Hi all,
Attached below is an example of what is happening to our existing SCADA.
It seems after patching some Rockwell Software that I thought...
The client has an application that when communication between the PLC and the Factory Talk VIEW supervisory fails, the object in the supervisory...
Hello all,
I am looking for a way to have a user get logged out after an X amount of time because to default so that user privilages are no...
Hello everybody.
I was wondering if there is a way in FTVIEW Studio to close ) view after x min without interaction .
My issue is the following...
Is there a way to choose the base font in ME. Text in the Arial Unicode MS which is the default font on my FTVS doesnt show up properly on a...
