OMron 3G2C7-LK201 and RS232 comms with LSS (and SCADA)

Similar Topics

D
Looking to buy an Omron Hostlink 3G2C7-LK201
Hello, I have an ooooold Omron C40K-CDR-A plc that I have to use a handheld unit to program. It's tiny and difficult to use so after doing a bit...
Replies
13
Views
3,820
Eric Nelson
Eric Nelson
R
Omron #3G2C7-LK201-EV1, Host Link Unit
I have a project to replace an old Omron #3G2C7CPU74E unit with a newer type. The equipment is still in operation. I have no documents or drawings...
2
Replies
17
Views
10,420
globalenergies
G
I
omron cj2m with scada comunication
I have an old plc in the system I have, moxa nport was used to communicate with scada, I want to replace the plc with cj2m cpu33 and eliminate...
Replies
0
Views
27
ismail efe
I
J
Omron CJ2m cpu33 - reading codes
Hi all, i have 8 CJ2m plc units that show different numbers on the plc display and i am stuck on reading the info. my unit has an ip address of...
Replies
2
Views
43
BobB
BobB
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
230
KalvMavin
K
Back
Top Bottom