sankardinesh
Member
I want wonderware script/logic for this below condition.
logic is for plc fault mode after timer start.
I'm having two bit B1 & B2.(timer start and timer off)
B1 will goes true (B1= 1),B2 will come true after 30 minute.If B1 goes false before B2 true for two/three minute. one alarm /one bit has to come..if time started ,plc went fault mode before timer off alarm has to home from scada.please help i'm new to wondareware
logic is for plc fault mode after timer start.
I'm having two bit B1 & B2.(timer start and timer off)
B1 will goes true (B1= 1),B2 will come true after 30 minute.If B1 goes false before B2 true for two/three minute. one alarm /one bit has to come..if time started ,plc went fault mode before timer off alarm has to home from scada.please help i'm new to wondareware