rookie77 Member R Join Date Aug 2012 Location hamilton Posts 30 Oct 12, 2014 #1 Has anyone had success hooking up the alpha 2 up with an hmi? So far, I haven't had any luck...... don't even know if im using the right cable. lol
Has anyone had success hooking up the alpha 2 up with an hmi? So far, I haven't had any luck...... don't even know if im using the right cable. lol
goghie Lifetime Supporting Member G Join Date Jan 2008 Location Belgrade Posts 802 Oct 13, 2014 #2 What HMI are you using? Only few HMIs support protocol for Alpha. Beside Mitsubishi, I know Beijer has support (they are producers of E series for Mitsubishi).
What HMI are you using? Only few HMIs support protocol for Alpha. Beside Mitsubishi, I know Beijer has support (they are producers of E series for Mitsubishi).
goghie Lifetime Supporting Member G Join Date Jan 2008 Location Belgrade Posts 802 Oct 13, 2014 #4 I have never programmed Proface HMI, but according to link below, Alpha is not in list of supported models. http://www.hmisource.com/otasuke/files/manual/gpproex/new/device/mit.htm
I have never programmed Proface HMI, but according to link below, Alpha is not in list of supported models. http://www.hmisource.com/otasuke/files/manual/gpproex/new/device/mit.htm
rookie77 Member OP R Join Date Aug 2012 Location hamilton Posts 30 Oct 13, 2014 #5 Was afraid of that, error I'm getting now is, serial Communication : com1 received data has framing error
Was afraid of that, error I'm getting now is, serial Communication : com1 received data has framing error