Connecting to Socomec Diris A40 using OPC

martinshaw

Member
Join Date
Jan 2013
Location
Rotherham UK
Posts
24
Hi

I have a Socomec DIRIS A40 meter. I can see its web page by typing its IP address in a web browser. Our IT department uses Kepware Communcations Server V5.12.140.0 which I beleive can communicate with the DIRIS device via an OPC driver using the IP address. Question is, which driver and has anyone done this or anything similar?

The reason I cannot put the information through the installed controllogix PLC is that its a new installation and still under warranty, so we cannot change the code at this time, but obviously, as there are new devices and data, everyone wants it immediately.

Thanks for your help.

Martin.
 

Similar Topics

I have 2 PLCs. One is networked to our plant, and the other is networked to the first PLC via a 1756-EN2T. I could easily get the second PLC...
Replies
3
Views
81
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
94
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
146
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
151
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
262
Back
Top Bottom