E300 Ethernet

After a bit of guidance on using an E300 on Ethernet with the operator panel.

Firstly where do the hardwired signals appear in the device tag list?

Secondly same question wrt to the operator station?

Thirdly do you have to configure the Operator station or do you simply get what you get? For example the button local/ remote where does it appear in the tag list?

First off, what is an E300. I would guess that it is a Mitsubishi HMI, but could be way off the mark.

Intelligent overload from Rockwell,think its the Embedded Ethernet equivalent of the E3 Plus.