Phalucifer
Member
Hey PLC buddies.
I am experiencing problems when I try to link the variable file from my Twidosuite program into my Vijeo. Basically it tells me that the adressing from the twido file (ex.: %QW0.1.0) does not comply with the equipment configuration.
Then it tells me to check the equipement type (like Schneider ModbusRTU) or IEC adress setting.
From what I know, everything is ok with both these things....
I am experiencing problems when I try to link the variable file from my Twidosuite program into my Vijeo. Basically it tells me that the adressing from the twido file (ex.: %QW0.1.0) does not comply with the equipment configuration.
Then it tells me to check the equipement type (like Schneider ModbusRTU) or IEC adress setting.
From what I know, everything is ok with both these things....