20-comm-e

nfvtmeinc

Member
nfvtmeinc
Join Date
Feb 2003
Location
Ohio
Posts
20
when connecting from a switch to a 20-COMM-E communication module in a powerflex 70 VFd is a straight through cable used
 
Yes, use a "straight through" Ethernet patch cable to connect any A-B Ethernet device to an Ethernet switch.
 

Similar Topics

R
Danfoss Aquadrive FC202 - Local command only if no comm
Hey guys. As the title suggests, I need to configure a Danfoss Aquadrive FC202 inverter, so that its logic inhibits the local command when the...
Replies
2
Views
25
Revnus
R
A
Ethernet comm problem with PLC when inverter enables.
Hi; In a cabinet of a machine, a Fatek PLC with an Ethernet communication card is working. In the same cabinet, there is a 1 kW inverter. When...
2
Replies
16
Views
497
Gleichner33
G
AutomationTechBrian
Modicon TSX Micro- Software, Comm Cable?
After updating a panel, I inherited another PLC for my "learning lab". It's a Modicon TSX Micro. I've not worked with a Modicon PLC yet, so I...
Replies
1
Views
128
tarik1978
T
W
22-COMM-E EXPLICIT MSG
Guys need a bit of help getting the instance correct for a 22comme with a PF40P. Trying to get 2 things first is the drive current amp draw...
Replies
1
Views
87
Ken Roach
Ken Roach
G
Powerflex 7000 and 20-comm-er config
I have 3 new PowerFlex 7000 VFD's. Rockwell was out to do some checking before startup. These are part of a larger electrical project. I gave the...
Replies
7
Views
317
Rounder
R
Back
Top Bottom