Micro810 12QWB smart relay..how to enable 4 AI ?

Hello all
This is my first time I post here, I am new in PLCtalk

It is interesting small size, 8-IN, 4-OUT, LCD..
I have 12qwb and read in the manual it has 4 AI.
But I don't know how to activate these 4 AI Channels..
additionally , are these 4 IA the first 4 ports or the second 4 ports?

by the way CCW is the software used to program this micro plc..

have any one used this??

The manual :
http://literature.rockwellautomation.com/idc/groups/literature/documents/um/2080-um001_-en-e.pdf

says:

2080-LC10-12DWD, and 2080-LC10-12QBB models.

Thank you for your reply and help.
I understood that if the voltage on these ports is between 0-10v then it will be regarded as AI input, or it was from 12-24v then it will be regarded as DI.
Is this understood is correct?
No additional procedure(configuration, enabling) required?

for your reading,

http://literature.rockwellautomation.com/idc/groups/literature/documents/qr/2080-qr001_-en-p.pdf

http://literature.rockwellautomation.com/idc/groups/literature/documents/qr/2080-qr002_-en-p.pdf

Thanks a lot,
I am reading these manuals

I think you need to get to the Embedded I/O to configure it.