PANASONIC Servo, wrong sticker?

medkhai

Member
M
Join Date
Sep 2012
Location
bangkok
Posts
11
I have bought a PANASONIC servo model MHMD022G1U

from the Panasonic datasheet it says its 200V, 200W

Once I received the motor it has a sticker which says

PANASONIC
AC SERVO MOTOR
Model No. MHMD022G1U
INPUT 3øAC 91 V 1.6 A
RATED OUTPUT 0.2 kW

Am I reading something wrong or the sticker says its 91V, while the datasheet says it's 200V

Thank you for help
Med
 

Similar Topics

J
Panasonic servo drive
Hi I have a Panasonic Minas A5 servo drive trying to test in free run a Panasonic A6 servo motor, But as there is a mismatch between the motor...
Replies
1
Views
1,660
gclshortt
gclshortt
H
Panasonic servo drive speed need to be changed
Hi. i have a Panasonic servo drive running in position control mode. i need to increase the speed of the servo motor. which parameter i can look...
Replies
0
Views
1,550
hinddhindsa
H
H
RS 232 Communication cable for MBDHT2510 Panasonic servo drive.
Hi, Anybody knows the pin out detail for RS232 Communication cable for Panasonic MBDHT2510 SERVO DRIVE (X2 PORT). Model no. of cable is...
Replies
0
Views
2,217
hinddhindsa
H
L
Panasonic SD30b servo drive
We have a customer that has acquired a couple of these servo drives, but with a limited manual. Google searching brings up a couple of sites, but...
Replies
0
Views
2,245
lostcontrol
L
M
Panasonic servo with Mitsubishi FX3U
I am using servo for the first time. We use PLC Mitsubishi FX3U-48MT which has transistor outputs. The servo driver is Panasonic model...
Replies
1
Views
3,828
iant
iant
Back
Top Bottom