OPC Link Configuration Help

Ones_Zeros

Member
O
Join Date
Feb 2014
Location
at work
Posts
367
Hello,
I have not configured a new OPC Link before & was needing some help please.We have TDS running that is polling Totalflow meters.

I was needing to setup OPC Link to communicate with Wonderware.
Here is a screen shot of what I have configured so far, but it doesn't work
I get a "configuration error" when I select "Data Monitor" in OPC.

OPC.jpg


How can i check this to see were I have made my mistake?
The Data Monitor is polling my meter, but displays a configuration error.

I appreciate any help
Thanks
 

Similar Topics

D
How is configuration file created? Intouch OPC Link to S7-400?
Dear All, In our system, we have two S7 400 PLC's one for each application..I have Intouch at PC station end...The steps I am following to view...
Replies
0
Views
3,784
drspanda
D
T
OPC/DDE LInk not shown value in excel
Dear Friends; I copy the link of Tag value and paste it as a link in Excel but Cell shows #REF The images are attached where i am wrong...
Replies
1
Views
769
andrewwei
A
N
OPC UA Certificate problem / IBH Link UA
Hi forum! I am using a unit called IBH Link UA which have a built-in soft Siemens S7-PLC, OPC server and OPC client function. I have mostly used...
Replies
2
Views
2,024
nickegeson
N
Firejo
5069 and failed OPC link
Has anyone had any success linking data from global tags in a 5069 (L306ERM) to RSLinx using an DDE/OPC Topic? I've done this hundreds of times...
Replies
2
Views
2,611
Firejo
Firejo
A
Help require to configure OPC server to link two PLCs with an HMI
Hi; I had designed an HMI in RS View32 Works and an SLC-5/05 had connected with that HMI via direct driver. Now as per requirement, i need to...
Replies
4
Views
2,771
geniusintraining
geniusintraining
Back
Top Bottom