Pepperl Fuchs RFID

Can someone please provide an example of the string that needs to be sent to P & F's IQT - F116 - R4M - V1 in order to read its device address?

Thanks

Ron

Section "5.2 Command overview" of this document...

Manual IQT-F116-R4-V1 / IQT-F116-R4M-V1 Read/write station

...outlines the commands for your RFID device, including the attached "get device address" command you requested.

As you probably know, you have to add the device address (<DeviceNo>) into each command string for the IQT-F116-R4M-V1 station.

Regards,
George

Thank u George

Can someone give me an example about read and write data with this device. I read it's manual but I don't clearly understand.
Thanks