Interfacing VLT FC51 micro drive with AB PLC

Hi,
I am just beginner in PLC and ladder programming.We have a requirement to control ac drive using PLC through VLT drive. Can you pls help me getting some guide how to program drive using PLC to control the speed of motor.

Thanks in advance.

mbr.

Use the analog out of the PLC to control the speed of the drive. This drive will be controlled using a 0-10vdc signal.
You will also probably need to control the enable of the drive. This can be done using a relay output of the PLC.
http://www.danfoss.com/NR/rdonlyres/CED0EBFA-20FA-4137-BE63-1CA240969B4E/0/FC51_QuickGuide_MG02B902.pdf

Regards,
Garry
http://www.accautomation.ca

Thanks for the help..got it now .