rslogix and powerflex 70

Hello there,
I have basic knowledge of PLC, currently working with RSLOGIX 5000 and powerflex 70. I am wondering how can I set parameter 140 to 300. if I have to use RSLOGIX which logic should I use, I used COP to cop the values from datalink to acce time and decc time. I am not sure if it works that way. please give me some hints.
many thanks

Do you have a PLC, or are you attempting to program a PF70 with Logix5000?

There are several different networking methods for connecting A-B controllers and PowerFlex drives, and the details are a little different for each one.

Please provide as much information as you can about the controller, the drive, the network, and what you're trying to accomplish with them.