ML1400 - channel 2 pinout

rQx

Lifetime Supporting Member
R
Join Date
Oct 2010
Location
Trelleborg
Posts
1,051
Hi!

Been looking like crazy for this, it isn't stated in the manual?!

Anyone knows where to get it?

/Tim
 

Similar Topics

2
ML1400 channel 2 modbus port pinout
I have a project which i will need to use both comm ports as modbus rtu master. I purchased a 1763-nc01 for the mini din connector(channel 0) but...
Replies
5
Views
4,743
Mickey
Mickey
S
Channel configuration for ML1400 PLC
Hello everyone, I have doubt regarding ports of Micrologix 1400 PLC. Channel 0 and Channel 2... Channel 0 is Rs232C or...
Replies
3
Views
3,830
Geospark
Geospark
L
ML1400 Channel 0 Pinouts
Hi, We want to connect a Barcode reader to Channel 0 of a ML1400, is there a specific cable we need? We have it working on Channel 2 with a...
Replies
1
Views
1,615
Mickey
Mickey
J
Cmore HMi to ML1400
Hello, I am new here and have been working with PLCs for a few years now. I have been tasked with setting up a Micrologix 1400….. to a Cmore 10...
Replies
10
Views
487
Jmccoy
J
L
ML1400 series C frn21
Hi, We may of finally received out first v21 ML1400. IP address set, proceed to download standard file for our machines & at about the 80% mark...
Replies
10
Views
1,438
Ken Moore
Ken Moore
Back
Top Bottom