Gsm

kumar satyam

Member
Join Date
Oct 2011
Location
hyderabad
Posts
30
Dear All,
Some query about GSM Module .
I have a remote Junction box with some AI and DI . How can i fetch those data in office.
Junction box is not fixed at some place niether its too close that a wired way of communicating is possible.
As per my thought I will place a plc near Junction Box along with GSM module .
and will place a GSM module in Office How to fetch dats from GSM module to a PC.
 
http://www.secomea.com/

I am confused about your question.
If you are looking for a GSM module then I would look to the above link. It will provide the communication from your PLC to computer.

If you are looking for the protocol to communicate to the PLC and retrieve data then we need to know the PLC model and type of communication. (Serial / Ethernet.. )
This link will show you how to communicate to a Do-more PLC using Modbus TCP.
http://accautomation.ca/now-you-can-have-robust-data-logging-for-free-part-1/

Regards,
Garry
http://www.accautomation.ca
 

Similar Topics

I recently purchased a GSM modem model number SGM510 from a local dealer in Mumbai, India and I am trying to connect it to a Delta PLC that I have...
Replies
0
Views
1,623
Hi, I have a Mitsubishi Alpha 2 Plc and am trying to link this to GSM Modem (Quasar Q2403R). With no success I am struggling with the following: 1...
Replies
7
Views
1,725
Hello Experts.... Could anyone guide me that in one application I have to send SMS data using GSM module & Micrologix PLC. By reading some...
Replies
0
Views
1,520
Dear you hope to receive your help, I need to make sending and receiving SMS messages between a ( AL2-24MR -A) Mitsubishi controller and GSM modem...
Replies
0
Views
2,579
I have a task where I need to send SMS with system problems alert through PLC. I think PLC is not matter. Let's say it have RS2323 and 485 on...
Replies
5
Views
2,076
Back
Top Bottom