Hi all
Long time lurker, new member.
I have a problem with at little project at home. I have a Siemens Multi Panel MP277 and a 1756-L55 controller with a 1746-ENBT/A. I'm trying to setup the Communications, but can't seem to get it right. Not sure where the fault is but here are some setting i've tryed.
In the Mp277 communiction path is set to 1,0 (rack,slot)
IP is in the same range as the 1756-L55
Tags are called the same as 1756-L55, and connections set to 1756-L55.
I can ping the 1756-L55 from the MP277.
They are both connected to my router, is this a problem ?
Is there something i should setup on the 1756-L55 ?
Long time lurker, new member.
I have a problem with at little project at home. I have a Siemens Multi Panel MP277 and a 1756-L55 controller with a 1746-ENBT/A. I'm trying to setup the Communications, but can't seem to get it right. Not sure where the fault is but here are some setting i've tryed.
In the Mp277 communiction path is set to 1,0 (rack,slot)
IP is in the same range as the 1756-L55
Tags are called the same as 1756-L55, and connections set to 1756-L55.
I can ping the 1756-L55 from the MP277.
They are both connected to my router, is this a problem ?
Is there something i should setup on the 1756-L55 ?
Last edited: