AB PLC Healthy Indication

dobidust · Feb 19, 2015

Hi All

What is the best way of indicating that my L32E PLC set up is healthy as I have not done this before.

Sherlock4me · Feb 19, 2015

https://docs.google.com/document/d/1RfaSrX32vrDTADrymcTDLsggSnpihcNaGHvsSS23JBM/edit?hl=en_US

This covers some initial steps on the L32E.

Regards

dobidust · Feb 19, 2015

i.e Use a PLC system healthy tag

widelto · Feb 19, 2015

Have you tried out PlantPax ??, they have a lot of AOI useful for diagnostics.

rdrast · Feb 20, 2015

What do you mean by "Healthy"?

widelto · Feb 20, 2015

I recall the term "Healthy" was used on some DC&AC drives. There was a wire on the drive terminal block call Healthy. Meaning that all internal circuitry was OK, that's why I mentioned AOIs for diagnostics.

rdrast · Feb 23, 2015

I just don't think that the OP has any idea what the OP is asking for.
There is no generic "PLC_Healthy" bit.
There are hard faults, soft faults, logic errors, hardWARE errors, softWARE errors, and lots of things to monitor them, IF POSSIBLE.

AB PLC Healthy Indication

dobidust

Member

Sherlock4me

Member

dobidust

Member

widelto

Member

rdrast

Lifetime Supporting Member

widelto

Member

rdrast

Lifetime Supporting Member

Similar Topics