Micrologix 1400 LCD

alphav

Supporting Member
A
Join Date
Sep 2007
Location
Ontario
Posts
35
Hello everyone,
I have two questions regarding using the LCD in "User Display" mode.
1. Is it possible to monitor in the program if the cursor button is pressed UP, DOWN, LEFT, or RIGHT?

2. If I set the LCD Command "L4 Source A" as an Integer and "Display with Inputs" = YES, the LCD shows "= 00005", if the Integer=5.
Are there anyway I can show only one(1) digit without the leading zero's as "= 5" ?

Thanks,
 

Similar Topics

R
MicroLogix 1400 - Modifying timers from the LCD Screen?
My project uses a MicroLogix 1400. First time I’ve used the 1400; used the 1500 for a few projects. I have 1.5 years’ experience programming...
Replies
11
Views
6,801
FactoryTalktotheHand
F
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
17
Chris3EC
C
T
Micrologix 1400 input question
Hi, I am working with a Micrologix 1400 model 1766-L32BXB. With no input wires connected to the “in12” thru “in19”, I am getting 24 volts while...
Replies
4
Views
218
joseph_e2
J
A
MicroLogix 1400 Intermittent 0379h Fault
Hi everyone, I hope I don't butcher this up, please feel free to critique me wherever if I do, I have an issue I would equate to "chasing...
Replies
4
Views
285
OkiePC
OkiePC
U
How to communicate between Siemens S7-1200 and Allen-Bradley MicroLogix 1400?
Hi everyone, I'm working on a project where I need to exchange data between a Siemens S7-1200 PLC and an Allen-Bradley MicroLogix 1400 PLC. The...
Replies
8
Views
600
ulotrichous
U
Back
Top Bottom