SDOR/W CANbus in Proface GP PRO

jdbrandt

Lifetime Supporting Member
J
Join Date
Oct 2002
Location
Pennsylvania
Posts
1,203
Does anyone have any implemented example code for using a SDOR/SDOW in a Proface LT4000?
I am wanting to read and write the control and status registers (x6040, x6041) from a third party CANbus drive, attached to the Proface.
 

Similar Topics

T
Sending a message to the CANbus with a Schneider M241 PLC
Hello everyone! I have a Schneider M241 as master of a CAN network with several encoders and whatnot, everything is working fairly well. Now...
Replies
3
Views
1,710
thedolanduck
T
P
Rainy Saturday experimenting with DeviceNet & CANBUS
I've wanted to experiment with this for a while, and this morning was the perfect time with the cold, heavy rain. I have a 1756-DNB in my test...
Replies
6
Views
2,705
AlfredoQuintero
A
A
PLC and CANBUS interface
Hello, I am fairly new to PLC programming and i have a problem connecting two devices. Mainly my problem is how to read data from the RFID which...
Replies
3
Views
2,466
Aleksandarm1116
A
R
CANBUS Question
Does anyone know if Canbus communication will work using standard SOOW Cable at about 50 feet ? does it need to be a shielded twisted pair? We...
Replies
3
Views
1,457
richleva
R
T
Which one is better devicenet or canbus?
I need to design a machine, it will have 5-6 servo motors and around 40 sensors. I am now going to choose how to connect the whole machine. I...
Replies
4
Views
2,224
JesperMP
JesperMP
Back
Top Bottom