help plz

Hello to all

i finished a new project by protool v.6 sp3 on win xp , i have S5 TTY Programming Cable when i connect to op 15 display transfer ready but when download the program from protool, massage display in protool say ( The type of device connected does not match the configured type of device.)
and connect is working

I believe that the message you are getting means that the project you created
does not match the actual device that is connected. Recheck the device versus the project configuration. I could be wrong.
regards,
james

thx james
but i check that,, and Compilation completed successfully
note i transfer that program from op 17 to op 15 with start anew project for op15