analog input work on ab plc5

yam785

Lifetime Supporting Member
Join Date
Jul 2004
Location
pa.
Posts
153
Terry Woods,
Thanks for the formula. It works for converting data to any engineering units.
Bob
 

Similar Topics

I've got a 4-20ma pressure transducer connected to an analog card on an AB PLC5. Under the setup for the card, I have to set a raw minimum and...
Replies
12
Views
7,316
Hi Guys, Im Re-writting a program from 6200 to RS Logix5k. Ive completed all the digital i/o's and logic that goes along with it. Now I just...
Replies
3
Views
4,345
Has anyone ever calibrated an analog Input module for a PLC5? Was it worth the effort? I have a REV C 8 channel input module in a new project...
Replies
16
Views
6,949
we have a problem with redundant processor PLC5 where there is analog input value be stable with the primary processor. and at fault when working...
Replies
3
Views
3,084
I'm trying to open the BTR/W Setup Screen for pre-existing BTR/W's in Logix5 and getting the warning "no module exist in I/O configuration". I...
Replies
3
Views
6,123
Back
Top Bottom