Schneider GVANxx Dual Terminal Numbers

aiki202

Member
aiki202
Join Date
Aug 2007
Location
Pennsylvania
Posts
178
I may be missing something basic here but I am curious what the dual terminal numbers represent on Schneider Electric IEC style aux contacts. I have also seen this on other manufacturer's products as well. What is the purpose of the two numbers such as: 32(62) or 44(74)?

Thanks in advance.
 

Similar Topics

K
Schneider Modicon Premium TSX P57203Controller issue
Everything was working fine, but suddenly CPU went into error mode, and the ERR and TER LEDs lit up. Now I can't download or connect with the PLC...
Replies
0
Views
34
[email protected]
K
S
NTP for Schneider M580/M340
Hello all, I am wanting to update the system clock via NTP in the M580/M340. I'm aware that we are able to connect to a NTP in the controller...
Replies
4
Views
124
S.Woollett
S
M
Pack drive elau Schneider ISH-100
I am using Schneider elau pack drive servo motor ISH-100. I am facing the problem that On the ISH -100 red light is blinking and pack drive C-600...
Replies
0
Views
57
Munish
M
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
101
Para
P
J
Schneider M221 ModBus RS-485 Communication
Hello, I need to access the bits from the fire system control panel through RS-485. So, I used Read Var block to read from the panel...
Replies
0
Views
186
jillgeorge18
J
Back
Top Bottom