Omron + 2 Intouch Scada laggy

dkulot

Member
D
Join Date
Mar 2015
Location
Croatia
Posts
1
Hi all, i'm new to this forum, and would really appreciated help with this matter:

I have Omron PLC CJ2M CPU35, 2 indentical scada on WW Intouch 2014, and Wonderware DAServer for Omron (DASOmronEth), and when one of the scada is on network everything works well, but when i connect both it is very lagging and slow, statuses are updated every couple of seconds, commands sometimes can't go to PLC from one scada, but it's ok on second...

Did anyone had problem like that?
 

Similar Topics

N
Omron,lookout and intouch
Hello! I like to Communication omron CPM2a whit Intouch. For Omron host link and driver i like to use lookout 6.1 and for disigne intouch. It is...
Replies
0
Views
1,533
nlc20
N
H
Connect Omron CPM2a to InTouch
Please help me conect CPM2A to InTouch I have CIF01 adapter to RS232 and I/O server in InTouch but it did not have option for this controler What...
Replies
2
Views
3,767
seppoalanen
seppoalanen
K
Siemens S7-1200 with Omron M1 - Modbus RTU
Hi all, Currently having trouble getting a speed reference to write over modbus to an Omron M1... I can successfully write a run command and...
Replies
6
Views
211
KalvMavin
K
M
Struggling to get good connectivity with Omron PLC (CS) and KeserverEx
Hi There, I have couple of Omron PLCs connected on my kepserverex and my intouch reads data from kepserverex. I have been observing that roughly...
Replies
4
Views
129
Mihir_007
M
A
Omron cj1m ETN cpu11 connection with NT631C
Hi dear . I have a system with cj1m cpu11 etn. previously NT 5z HMI was connected with plc. recently my old HMI got damaged. I want to replace it...
Replies
11
Views
223
ali1122
A
Back
Top Bottom