PLC Fault code 23/ 1768-L45 rev;20:13

That's IO fault. Do you have mismatched IO? When you view the chassis online, do you see any caution mark on any of the IO module?
 

Similar Topics

(Allen Bradley PLC)Issue resolved by download the project, But What is the main root cause of this Major Fault Error code 62 “Non-Recoverable...
Replies
3
Views
3,160
Hi all, I've been tasked with finding a glich in a program/programs... A barcode data array is moved through a line where pallet strapping and...
Replies
12
Views
3,750
I'm working on troubleshooting a PLC for a piece of manufacturing equipment. The issue I'm trying to resolve is an open wire fault not getting...
Replies
2
Views
481
Hi I am biginner in B&R plc . Purifier system is transmitting the data to remote display unit. Currently there is no reading is display on remote...
Replies
0
Views
813
Hello guys. There is a fault on the PLC program that comes to the HMI panel via Data Block. This fault prevents the machine from working. Incoming...
Replies
1
Views
1,461
Back
Top Bottom