Need profibus GSD file for Bubenzer CMB2-SB brake monitor

smartatuls

Member
S
Join Date
May 2013
Location
India
Posts
30
Hi all,

I want configure Profibus-DP nodes of Bubenzer CMB2-SB brakes which monitors the brake status and sends signal to PLC(profibus master=IC695PBM300). I don't have the GSD file to configure it in my PLC project hardware configuration :oops:

If anyone is having the GSD file please share.

Thanks
 

Similar Topics

V
MM440+Profibus. Dont need to use PZD in PPO1!
Hi, I'm using PPO1 to communicate with MM440. I only need to read and modify MM440 parameters, so i sucssesfully use PKW mechanism. I don't have...
Replies
1
Views
1,301
JRW
JRW
S
Need an advice for Modbus & Profibus Scada program
Hi all I want your advice for my problem : I have two PLC control systems , first is an old one and I use an Intouch Scada system to monitor and...
Replies
4
Views
3,394
soulmate
S
M
Need some Profibus help
Hello, I have some basic questions to ask about Profibus. Tt will be a little long to explain all, but I prefer giving all details to help people...
Replies
3
Views
2,719
Marioplc
M
K
need solution on pc to profibus communication
hi to all i need a solution on following matter i have a profibus network having siemense s7 plc one pc and it has an ethernet port to be...
Replies
3
Views
2,012
kraj
K
Q
Profibus Modbus EGX IJBs...need help understand
Hiya, In the past I have worked with AB PLCs, Citect, DH+ but I have recently changed jobs and struggling with the changes. Sometimes dont know...
Replies
2
Views
1,674
danw
danw
Back
Top Bottom