M340 64 bit floating point support

atomtm

Member
A
Join Date
Jun 2014
Location
Germany
Posts
130
Do the M340 processors support 64 bit floating point numbers?
I have read a post here on the forum that states that it doesn't . Is it true? Is there a reference on Schneider's manuals for what types of variables the cpu's support ?

Thank you !
 

Similar Topics

S
M340 System bit clock not working
Hello everyone one. I'm using M340 with simulation mode (actually I still don't have the cpu to test the software). I've made a simple counter...
Replies
4
Views
488
suppaman
S
E
Modbus serial data from multiple devices to M340 controller
I have 9 field devices, three METSEPM5110 power meters and six ACE949-2 rs285 interface modules. I want to read this Modbus rtu data through rs485...
Replies
8
Views
303
Enggshab
E
R
M340 as modbus master
I'm using M340 (Schneider Electric) as modbus master. It works fine but if there is a disconnection with the slave, it stops working even after...
Replies
2
Views
415
Corsair
C
T
M340 and SR2MOD03
Hello, I am trying to send sms messages using SR2MOD03 with an M340 and can't find anything related to it on the internet, can you please help...
Replies
0
Views
202
the18
T
J
Problem with PLC M340
Good day, I have an issue between an M340 PLC and a PRA 0100. The problem is as follows: I have a communication link between the PLC and the PRA...
Replies
0
Views
824
jorge?07
J
Back
Top Bottom