nyan00122 Member N Join Date Mar 2015 Location marikina Posts 9 Mar 11, 2015 #1 Any one who has experience programming B&R PLC?? I want to learn how to create program and communicating it to the hardware?
Any one who has experience programming B&R PLC?? I want to learn how to create program and communicating it to the hardware?
the_msp Lifetime Supporting Member Join Date May 2008 Location Northern Ireland Posts 1,271 Mar 11, 2015 #2 Try youtube, e.g. https://www.youtube.com/watch?v=1LVHfl3K-Es even if it is not narrated in your language, follow the screen recording
Try youtube, e.g. https://www.youtube.com/watch?v=1LVHfl3K-Es even if it is not narrated in your language, follow the screen recording
nyan00122 Member OP N Join Date Mar 2015 Location marikina Posts 9 Mar 11, 2015 #3 thank you sir it works. My problem now is how to configure the hardware and how to transfer the program to the hardware.
thank you sir it works. My problem now is how to configure the hardware and how to transfer the program to the hardware.
CapinWinky Member Join Date Aug 2011 Location Virginia Posts 566 Mar 11, 2015 #4 Automation Studio has a great help file and sample programs (Coffee Machine) to learn from as well. Other than that, B&R has training that is inexpensive compared to other platforms.
Automation Studio has a great help file and sample programs (Coffee Machine) to learn from as well. Other than that, B&R has training that is inexpensive compared to other platforms.