S7-400 (DFB Block Compile errors) Help

a_rishi

Member
A
Join Date
Jul 2011
Location
Mauritius
Posts
12
Hi Everybody

I'm new to Siemens PLC and is working on a Poject for m course.

I'm trying to build a DFB Motor for Global use.

I have the code in SCL but there are certain errors such as the Bit Second (1 Sec), the Rising edge of the Bit Second, etc.

Please clarify how can we insert Bit Second in SCL and its Rising edge.

Kindly check the FDB structure Text and help me to clear the faults. I could not attached the FDB due to size limit. Please Download it from
https://www.dropbox.com/s/aeuuz3w3bk0xh6n/DFB Block Motor.zip?dl=0

Kind Regards
 

Similar Topics

B
Micro1400 Recipe Dump
I have a micro1400 processor running two routines (transfer compression/compression molding press). Recipe parameters are stored from job to job...
Replies
0
Views
15
Bltz2
B
B
MTP400 Unified Comfort Panel Missing
Is there anyone who can help me regarding this HMI is missing the choices when I make a new Device in TIA. Only 7" Display above are the choices...
Replies
3
Views
73
mk42
M
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
87
Chris3EC
C
M
Siemens S7-400 Memory Full
Hi, Yesterday, I was at a customer site. I made one little change. Changed a dummy bool output to an actual output. I didn't add any tags, or...
2
Replies
15
Views
324
Lare
L
P
Mircologix 1400 ModBus RTU Link Layer Error
Hi, I'm having an issue with a mircologix not transmitting out. The current setup is a mircologix 1400 connected to a Guardian 100 Radio...
Replies
1
Views
108
drbitboy
drbitboy
Back
Top Bottom