How to reset Minas LIQI location from Panasonic PLC

eotty

Member
Join Date
Feb 2015
Location
Stockholm
Posts
2
Hi

I'm having a linear track controlled by a minas liqi servo and controller, when the servo is all the way to the left, i want it to reset the location.

I tried to set.
sys_diPulseChannel0ElapsedValue:= diSetValue;

This result in the numerical value is set to 0, but the servo's absolute position is still wrong.

Any help in suggestions, answers, links would be highly apreciated.
 

Similar Topics

Hi Guys, I have a 1769-L24-QBFCB1 that has the OK light flashing on the embedded counter module. The manual states it is a resettable fault, but...
Replies
0
Views
19
We are using RED LION HMI Since las 15 years. To day we have found that My log file has data up to 22 Mar 2024 1:16. Then After new Log File is...
Replies
22
Views
843
I'd like you to meet my IO_Link Block, Fred. There are a couple of SSVs outside of Fred's AOI whose main purpose in life is to prevent me from...
Replies
2
Views
114
Hi y'all Just a quick question for using Rslogix 5000 I'm using a counter up bit with an analog signal (0-10V). When 10V is measured, counter...
Replies
5
Views
206
I want to factory Reset my 5380 (5069-L310) I have here in home lab. Reason being I want to make a Internal How-To video for Setting the IP...
Replies
2
Views
438
Back
Top Bottom