Hi Experts,
I'm facing with a problem in next configuration system,
SYSMAC OMRON C200H CPU01 PLC with LK201-V1 communication module and Hitech Electronic HMI panel(very old), the problem it's not communicating i cant find out where is the problem either the HMI communication port not working or communication module on PLC.
How could i connect to the PLC and make any diagnostics about the communication, which software should i use for this type of CPU? and which cable? I've never worked worked with OMRON PLC.
Thanks in advace,
Best Regards
Greg Estrin,
http://www.estrin.co.il/#!home/mainPage
I'm facing with a problem in next configuration system,
SYSMAC OMRON C200H CPU01 PLC with LK201-V1 communication module and Hitech Electronic HMI panel(very old), the problem it's not communicating i cant find out where is the problem either the HMI communication port not working or communication module on PLC.
How could i connect to the PLC and make any diagnostics about the communication, which software should i use for this type of CPU? and which cable? I've never worked worked with OMRON PLC.
Thanks in advace,
Best Regards
Greg Estrin,
http://www.estrin.co.il/#!home/mainPage