PLC sestep 290

AT58

Member
A
Join Date
Apr 2015
Location
Monza
Posts
1
Hello.

I need your help. I have a car with faulty PLC Sprecher & Schuh SESTEP 290 PCU20. If anyone still has manual, software programming and diagram of the connection cable I would be grateful if you could send them to me at queso email address: "[email protected]".

Thank you very much.

Have a nice day.
 

Similar Topics

Lancer
Sprecher + Shuh Sestep 290 PLC
Hi all, I have searched this site and googled the www, looking for a link to the SESTEP 290 user manual with no luck. I am trying to convert the...
Replies
0
Views
2,512
Lancer
Lancer
T
PLC Delta DVP 12SE and HMI Kinco GL043E not propperly connecting
Good Day to all of you, this is my first post, i will try to explain as best as possible, english is not my natural language. I am performing an...
Replies
0
Views
26
Tecnolaundry
T
Mas01
S7-TIA Portal: How can I make a project if I've only got the code loaded on the PLC?
Hi All, Someone at work has put a PLC system on my desk, that's just been taken off an idle production line. He said "It's an S7 PLC. We don't...
Replies
9
Views
167
mk42
M
A
ATS using a PLC
I have a project to automate four generator sets. The system will monitor and store the load demand of the factory. Once there's Power outage, the...
Replies
0
Views
49
Alibaba07
A
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
5
Views
96
mk42
M
Back
Top Bottom