ATV61 Control Using Magelis HMI

stamuk

Member
S
Join Date
Apr 2015
Location
harare
Posts
1
I have been trying to control an ATV 61 Drive using a Schneider HMSTU855 HMI but I am getting a Modbus Error Code H01. The option card i am using is the VW3A3310D for Modbus TCP/IP.
 

Similar Topics

Q
Atv61
Dear All, can any one post some manual or help me out on how i can control ATV61 through its terminals actually what i want is that I want to...
Replies
2
Views
1,523
jtashaffer
jtashaffer
P
Unity Pro and ATV61 - program example
Hi I have an a applcation with SE M340 and ATV61. I want to control frequency and start and stop the ATV61. I have a correctly configured...
Replies
2
Views
2,678
pazuzu
P
EICS
ABB PS501 Control Builder Plus V2.3 Install - anyone use it or know of it
does anyone have an install or know if/where i can download it for the following "ABB PS501 Control Builder Plus V2.3 " the software was a free...
Replies
2
Views
62
ojz0r
O
B
Advice for 2 control signal one field equipment
I am not sure why this is requested, but it was asked. Currently I have one PLC , with one output to a relay, turning on a field equipment (just...
Replies
7
Views
202
Steve Bailey
Steve Bailey
N
Here is an odd one ...0-24vdc control valve
I have been requested to test this proportioning valve for PLC control of flow/pressure. Dwyer Series SVP Proportioning Solenoid Valve The flow...
Replies
10
Views
408
NetNathan
N
Back
Top Bottom