Connecting to Baxter

Jstandby

Member
J
Join Date
Aug 2014
Location
ohio
Posts
1
Purchased a ML 1400B-The question I have is; am I able to connect another computer directly into the Ethernet port and communicate with the computer that is using TCP/IP protocol?
 

Similar Topics

J
Connecting a Micrologix 1500 to a PanelView Plus 7
I have been working on this for a while now and I can't seem to get it. I was finally able to view the 1500 on the PanelView under the serial...
Replies
1
Views
25
jscampbell210
J
K
Connecting FactoryTalk Datalog to MariaDB
Hello, I was looking to store some values from our FactoryTalk Application using Datalog to a MariaDB. I see there is quite a bit of documentation...
Replies
1
Views
51
drbitboy
drbitboy
D
Connecting to a PLC through VM Ware
I haven't encountered problems connecting to a PLC through VM Ware but I am with this particular machine. I'm running Windows 7 on a Windows 10...
Replies
8
Views
190
arpus4KM
A
M
Connecting Different controllers (brands) with same I/O devices - Demo Station Design
Hi, I want to build a demo station to test devices and programs and I need some help with it. I want to connect GuardLogix, Piltzmulti and...
Replies
1
Views
139
JeffKiper
JeffKiper
N
Connecting to the PLC or 1756-ENBT over USB
please using the usb can i assign any ip address that i want ?
Replies
4
Views
148
geniusintraining
geniusintraining
Back
Top Bottom