communication with ultra 5k

Ramsri

Member
R
Join Date
Apr 2014
Location
coimbatore
Posts
40
anyone know about communicating with Ultra 5000 drive. i have made one null modem cable and communicated using ultra software and the drive is not communicating. I have tried with even different baud rates. Does any one know about ultra 5000 communication. Suggestions are much appreciated
 

Similar Topics

W
AB Ultra 100 Communication to PC
Hi Guys, I have got utlra 100 which has been working fine over last couple of weeks. But now it is showing green/orange blinking LED. On Power up...
Replies
7
Views
2,707
nehpets
nehpets
A
communication between two siemens plc's with different ip address
i have two plc 1. s7-1212dc/dc/dc ip; 192.168.0.1 2. s7-1500 1513-1pn ip; 192.168.3.2 i need to get data from plc1 to plc2. any idea how to do...
Replies
0
Views
1
azadM
A
A
WinCC Unified and PLC weird communication issue
I have created a project in TIA Portal v16 Upd6 with S7-1200 (6ES7214-1AG40-0XB0) and WinCC Unified (PC station). The communication between the...
Replies
4
Views
137
mk42
M
H
No communication with PLC 90-70
Hello We have installed several G.E. Fanuc 90 70 PLC Everything was ok but suddenly we can not communicate anymore with any PLC with the software...
Replies
0
Views
66
Hazatov
H
Voltimus
IDEC PLC to PLC modbus communication
Apologies for not being the best IDEC programmer. I recently was doing some inspections on a site that had 3 FC6A IDEC processors. The issue is...
Replies
0
Views
74
Voltimus
Voltimus
Back
Top Bottom