Magelis Modbus Protocol

nestbulala

Member
N
Join Date
May 2015
Location
Saudi Arabia
Posts
10
Dear Experts,

I am using XBTL1000 v3.5 to configure Magelis XBTF Terminal but cannot transfer application due to a missing modbbus protocol driver. Can anyone guide me on how I can access the file and tips on how to do a run around or other way to do it.

Thanks and I will appreciate any information.

Nest
 

Similar Topics

A
Magelis HMI to Danfoss FC102 Modbus
Hi, I want to connect a Schneider Magelis HMIS5T to a Danfoss FC102 via Modbus to display some values and just having some issues with the...
Replies
4
Views
3,422
Andrew EPS
A
L
Magelis Modbus RTU comms
Hello, I am wanting to get a Magelis to read holding registers from an IO device using FC04, but in testing it always seems to use FC03. The...
Replies
3
Views
2,517
lostcontrol
L
R
Connecting Magelis XBTGT6330 t0 Modbus plus Network
We have a Magelis XBTGT6330 that we want to connect to Modbus Plus network. My question is: can we connect the XBTGT6330 directly to the Modbus...
Replies
0
Views
2,628
RZR
R
S
Connecting 2 Twidos to a Magelis Hmi on Modbus
Hi, I want to connect 2 Twido ldmda20drt PLCs to a Magelis GT5330 Hmi through Modbus. Magelis is the master controller. Twidos have Rs-485 port...
Replies
10
Views
7,485
chud
chud
T
Magelis Modbus TCPIP issues
I have a SCADA system trying to poll 3 x Magelis XBTGT1335 HMI's using modbus TCPIP. The SCADA system is acting as the master. The problem is with...
Replies
4
Views
3,791
tjhsys
T
Back
Top Bottom