how to connect thermal printer with HMI serial port.

amitsaklani

Member
A
Join Date
May 2015
Location
Delhi
Posts
1
Hi!

i am having a 3.5" colour HMI with serial printer port, how can i attached thermal printer with this can any one help me.

hmi make :- selec
 

Similar Topics

J
help to connect thermal printer with HMI serial port
hi! i am doing a project where . i have HMI with serial printer port. now manufacture cliam that any serial printer will work with HMI. now on...
Replies
2
Views
2,338
Aabeck
Aabeck
C
MSG instruction connect failure between ControlLogix5572 and MicroLogix 1400.
I'm using a SLC typed write from the ControlLogix5572 to the MicroLogix 1400, with path: 2, (MicroLogix IP). The ControlLogix equipment has a...
Replies
0
Views
87
Chris3EC
C
P
How to connect to Schneider M241 PLC remotely from EcoStruxure Machine Expert software using SSH tunnelling?
Hello, As part of our project, we are using an M241 controller. This controller interfaces with an industrial computer and a router via a switch...
Replies
2
Views
95
Para
P
T
HMI shows motor running even though disconnect is on.
Here's what happened, Operator turned on the disconnect for an auger while it was still running to cut power. Auger DID in fact turn off, but the...
Replies
8
Views
333
TheColt46
T
J
Rockwell Techconnect service contract price increase?
What has been your experience with year over year price increases on your Tech-connect service contracts? Is it up to the distributor? 30% seems...
Replies
5
Views
284
bill4807
B
Back
Top Bottom