Omron FINS Serial vs Hostlink

nicer

Member
N
Join Date
May 2011
Location
manila
Posts
32
Good day,

There's an old Omron CPU Sysmac C200HE connected to Siemens SCADA WinCC via RS-232 and seemingly Hostlink protocol (it says "Omron C-Series Hostlink" on WinCC tag management and installed software)

Now I found an OPC site which lists C200HE CPU under "FINS Serial" but not under "Hostlink", why is that?

Please also check the whole story:
http://www.plctalk.net/qanda/showthread.php?p=643162#post643162

Thanks for any response!
 

Similar Topics

V
Omron CJ2M CPU33 with FINS TCP to PC example program
Hello, someone have an example of an comunication between an Omron CJ2M CPU33 with FINS TCP to PC? Thanks for help
Replies
1
Views
1,359
gclshortt
gclshortt
V
Arduino + ethernet shield + omron fins tcp/ip
Hello people Has anyone managed to perform an arduino communication with an omron PLC through the FINS TCP/IP protocol? I already managed to do...
Replies
3
Views
2,144
gclshortt
gclshortt
V
Omron CJ2M CPU33 FUNCTION BLOCK FINS TCP/IP OR FINS UDP
Hello Someone know an Function Block or example code for Fins TCP/IP or UDP working for CJ2M CPU33? Thanks for help
Replies
0
Views
1,203
vmlourenco
V
H
OMRON FINS TCP documentation
Hi Guys, a few years ago I started to write a little test program for PC to communicate with OMRON PLCs by FINS commands. Well, I would swear...
Replies
2
Views
2,777
HZsolt001
H
A
fins gateway v3 for omron
hello everybody i want to download fins gateway v3 but i didn't know ... i searched in several website but i didn't get any information ...
Replies
5
Views
1,830
abodeez
A
Back
Top Bottom