ABB ASCII Com sample code

(8{)} ( .)

Lifetime Supporting Member
(8{)} ( .)
Join Date
Apr 2004
Location
Israel
Posts
625
Hey all,

I've got a protocol to program. The controller is an ABB 573. I'm looking for some sample code to spit a string out of Com1 and read another back in.

I'd appreciate being able to look at some working code.

Thanks all!

Yosi
 

Similar Topics

M
Ascii Comms to ABB MagMaster
Trying to talk to an ABB Magmaster through serial using TOP server. Does anyone know the ascii commands? I have the manual which gives me the...
Replies
0
Views
1,082
mwilkie
M
EICS
ABB PS501 Control Builder Plus V2.3 Install - anyone use it or know of it
does anyone have an install or know if/where i can download it for the following "ABB PS501 Control Builder Plus V2.3 " the software was a free...
Replies
2
Views
78
ojz0r
O
S
IE5 ABB motor and VFD
Hello, It is mandatory to use VFD IF i use IE5 electrical motor? What happens If connect it directly as delta without VFD? Please look at motor...
Replies
1
Views
128
kamenges
K
R
ABB ACS800-07 VSD fault on ramp up between 98 and 100%
Hi hoping someone can assist me with current issue I am experiencing with an ABB drive. Problem I’m experiencing is a ABB drive supply a large...
Replies
4
Views
205
BryanG
B
R
ABB AC500 (PM573-Eth) PLC Program Backup
Hello all, I have an ABB PLC (PM573) and it has without MC card. I need to take backup from PLC to PC (in automation builder v2.7 ). My...
Replies
10
Views
423
arpus4KM
A
Back
Top Bottom