Hey everyone.
Im doing rotary knife application for my senior design project.
I need some help about the program. i dont understand some parts. a general comment about whole program will be very good. i took screenshots of the program because i cant send them from lab's pc.
https://www.dropbox.com/s/irht4bv2rvzw9x6/RotaryKnifeApp.rar?dl=0
burakuyg1,2,... is the application part
burak1,2 is the calculating part
reg1,2... is the registration part (which i dont understand fully)
we are doing this with logix
the sensor part and the speed part is not working correctly
for example we have slow speed of knife for bigger object
we have syncron speed for the objects which has same radius
but we cant have more speed if we have smaller objects than the knife's radius.
and since our sensor is not working we are toogling this inside the program.
thanks for the help
Im doing rotary knife application for my senior design project.
I need some help about the program. i dont understand some parts. a general comment about whole program will be very good. i took screenshots of the program because i cant send them from lab's pc.
https://www.dropbox.com/s/irht4bv2rvzw9x6/RotaryKnifeApp.rar?dl=0
burakuyg1,2,... is the application part
burak1,2 is the calculating part
reg1,2... is the registration part (which i dont understand fully)
we are doing this with logix
the sensor part and the speed part is not working correctly
for example we have slow speed of knife for bigger object
we have syncron speed for the objects which has same radius
but we cant have more speed if we have smaller objects than the knife's radius.
and since our sensor is not working we are toogling this inside the program.
thanks for the help
