IFM CR0032 analog parameters

aditihp

Member
Join Date
Jun 2015
Location
Pune
Posts
2
Hi, I am working on IFM CR0032 and I'm new to codesys too. I need some help with handling analog parameters in codesys. I am using a pressure sensor whose output is current (4-20 mA). To convert this into digital value and use for programming in codesys, what should I do??? Need help
 

Similar Topics

Hello, I am new to Codesys, and am trying to learn about it for a project we're developing. I've got a couple questions, but first a little...
Replies
1
Views
73
How can I integrate my S7-300 Simatic with the IFM AS-i Master AC1335 and its slave IOs, such as 2411 and Airbox 2041, into Simatic Manager?
Replies
0
Views
102
When adding an IFM AL1322 IO-Link Master Module to a 1756-EN2T Ethernet Card on a 1756-L82E Controller, The Input and Output data file does not...
Replies
0
Views
94
Hello, I have downloaded the IFM AL1327 .eds file and went through the EDS Hardware Installation process on Studio 5000 v32. It seems to work...
Replies
5
Views
1,024
Not too familiar with Siemens plc's and never used IO link before , but got an ifm starter kit, so some dumb questions coming up. I am good on...
Replies
11
Views
1,378
Back
Top Bottom